Please follow the instructions for measuring the existing gasket or finding the needed information from the data plate on the unit. Decide the category of gasket that you need:

• Grocery / Glass Door Gasket
• Non-Grocery Custom Gasket

• Our gasket measurements are outside edge to outside edge of the gasket.
• Please confirm your existing gasket is the same size as the gasketyou are looking to order.
• Typically, gaskets are measured to 1/8" for accuracy (but this can vary slightly).
• If you are unsure of the gasket you need, call us at (806) 640-8910 or chat with our gasket experts!

• Clean the door before installing the new gasket.
• Soak the new gasket in hot water if you need to remove any twists or kinks before installation.
• You can also use a hair dryer to heat the gasket (do not heat too much or the material will melt).
• Your new gasket may take several days to form a maximum seal.

• To clean your gaskets after installation, use only mild, non-alcohol, non-degreaser-based products or simply water. This ensures the gaskets remain in good condition and function properly. Avoid harsh chemicals that could damage the material.
• Gentle pressure with mild soap and warm water is the only way to clean them.  DO NOT use detergents or bleach.  This dries out the rubber and causes premature cracking.
• Avoid using degreasers or alcohol-based products to clean your gaskets. Instead, you can use mild products like Ivory soap. Additionally, there are wipes specifically designed for cleaning gaskets that you can purchase.

Offset on refrigerator doors is the difference, in inches, between the outside surface of the frame or cabinet to which the door seals and the face of the door.